Besten provides a selection of the most popular results for Power Amplifier For Signal Generator, based on consumer ratings and value for money. If you are not satisfied with the results, you can use the search function to look for specific items. To make your search easier, you can also choose from among the popular search suggestions provided.
1
Youmile 0.1-2000MHz RF WideBand Amplifier 30dB DC 6V-12V...
Key Spec:
- Work Voltage:DC 6V-12V; Operating frequency：0.1-2000MHz; Maximum power output：+10dBm(10mW)
- 0.1-2000MHz RF WideBand Amplifier with wide frequency range, high gain, low noise figure
- 0.1-2000MHz RF WideBand Amplifier Can be applied to various rf receive front-end and increases communication distance
- Widely used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification
- Package Content:1 x 0.1-2000MHz RF WideBand Amplifier, 1 x DC Power Pigtail Cable Female, 1 x SMA Male to Male Straight Connector, 2 x Rubber Cover
2
COVVY XR2206 High Precision Function Signal Generator DIY...
Key Spec:
- Five precision resolution,can produce sine wave, triangular wave, square wave.
- Frequency range: 1Hz-1MHz.
- Frequency adjustment with coarse adjustment, fine tuning.
- Wide range of power supply, it's suggested to use DC 9-12V external power supply or 9V battery(NOT Included).
- Fewer components,easy to install.
3
Signal Generator FPA2000-50W High Power Dual Channel...
Key Spec:
- Adopt with imported integrated device, this dual channel power amplifier has high stability, and provide low distortion, high precision signal amplification.
- DC12V DC single power supply, convenience for outdoor using.
- Sine wave full power bandwidth range: DC-100KHz.
- High precision, low distortion signal amplification.
- Up to 140 Vpp(±70V) high voltage output, ≥10V/us slew rate and 10KΩ input impedance.
4
Jieotwice 2 Channels Power Amplifier, DDS Signal Source...
Key Spec:
- Intelligent digital display
- Frequency digital display
- Super Large Pure copper Battery clamp,rust proof, best conductivity.
- High/Low voltage adjusting
- Imported silicon
5
Signal Generator FPA301-20W 5Mhz Function Arbitrary Waveform...
Key Spec:
6
Frequency meter FPA301-20W 5Mhz Function Arbitrary Waveform...
Key Spec:
7
Digital Multi-function Dual Channel DDS Function Signal...
Key Spec:
- Made of high-strength aluminum alloy, the dual-channel function generator amplifier is strong and durable, featuring excellent heat dissipation.
- The voltage amplitude of the input signal can be amplified by 2 times. The maximum current of each channel can reach to 0.5A. It works in the range of 0 to 10MHz.
- It can be used together with our signal generators and signal generators produced by other manufacturers.
- It is perfect for teaching instruments, industrial control, product line tests, metal detection, medical therapy, medical beauty and other scopes.
8
Signal Generator FPA301-20W 10Mhz Low Distortion DC...
Key Spec:
9
Signal Amplifier RF Signal Amplification Fixed Gain...
Key Spec:
- 【LOW NOISE FIGURE】-- With low noise figure, signal amplifier's installation is simple, not require particularly complicated operations
- 【GUARANTEED QUALITY】-- Good product durability helps power amplifier with guaranteed quality, you can use it with confidence
- 【64DB IMPEDANCE】-- Signal module is with 64DB input and output impedance, supports exquisite craftsmanship, practical
- 【5-6000MHZ AMPLIFIER】-- The amplifier is a 5-6000 MHz (20dB) amplifier with a wide dynamic range and a wide operating frequency
- 【FIXED GAIN RF AMPLIFICATION】-- Meanwhile, this signal amplifier can be suitable for all types of fixed gain RF signal amplification
10
Signal Generator DIY Kit, 2 Channel LCD Display 1Hz-150Khz...
Key Spec:
- The signal generator module has a 3-channel button: Set, Up, Down
- Two independent PWM outputs, with which the frequency and duty cycle can be set separately.
- Wide frequency range and high precision.
- This signal generator can communicate serially.
- Wave rectangle signal generator can be used to generate an adjustable pulse for the MCU and control the relative circuit.
Last update on 2023-09-24 / Affiliate links, Images and descriptions from Amazon Product Advertising
How to Choose the Best Power Amplifier For Signal Generator
Choosing the right Power Amplifier For Signal Generator can be a challenging task, but with the right information and research, you can make an informed decision. There are a number of factors to consider when choosing a Power Amplifier For Signal Generator, including its features, price, and overall quality. It's also important to consider the brand and customer reviews to make sure you are getting a product that meets your needs.
Popular searches
[random_links]
